This post is about to download the latest driver of M8 chip. The driver can support for Windows 32 & 64-Bit. Here you can download the official USB driver for your Alldocube M8 device. This driver allows you to connect your device to the computer and transfer files like images, videos, documents, etc.
If the hardware belongs to a class supported by Microsoft, Windows loads one of the in-box drivers for that class automatically. Otherwise, a custom client driver must be installed. You can follow below points to install the driver on your PC.
Table of Contents
1. Download
M8 Chip USB Driver For Windows enables you to connect your Android devices powered by the MediaTek chipset to your PC. This enables you to transfer data like pictures, music and videos. It also allows you to backup messages and contacts. It helps free up space on your device by transferring data to the computer. It also supports SN Write Tool and can be used for firmware flashing or IMEI writing.
WDK provides headers, libraries, tools and samples that you can use to develop USB client drivers for Microsoft Windows operating systems. These drivers communicate with a USB target through device driver interfaces (DDIs) exposed by the USB device stack.
The USB client driver sample in this section uses the uhci kernel-mode driver framework to develop a user-mode driver that emulates a virtual COM port and communicates with a FTDI-based USB bridge device. It is intended for C/C++ programmers who are familiar with the Windows Driver Model (WDM). Its implementation uses a hardware abstraction layer function called a USB HAL.
2. Extract
If you are an owner of Pipo M8 HD and looking out for usb drivers to connect your device with PC or Laptop successfully, then you have landed on the right page. Here you can download the official USB Drivers, ADB Driver and Fastboot Driver for your Windows Computer that can help you establish a connection between your device and the PC.
A USB client driver uses the Windows Driver Framework (WDF) or Windows Driver Model (WDM) interfaces to communicate with hardware via USB-specific Function Call DDIs. This section introduces the fundamentals of how a client driver uses these DDIs to send requests to a USB driver stack.
It supports a wide range of USB devices, from simple serial to high-speed USB IO controllers. The USB driver can be used to access a device as a virtual COM port or directly through a direct (D2XX) driver. This allows a user to transfer data between the device and the PC, backup/restore data on the device, or even install stock firmware on the device.
3. Install
Developed by Alldocube, the M8 Chip USB Driver allows you to connect your device to your computer. It supports a variety of Android devices and can be used to flash stock firmware and install IMEI. It also supports custom recovery (CWM/TWRP) and can remove factory reset protection.
The USB Client Driver sample provides a framework for writing a Windows driver that communicates with the target device using DDIs exposed by the USB driver stack. It is designed for C/C++ programmers familiar with kernel-mode driver development and Windows Driver Kit (WDK) headers.
A USB client driver enumerates the device and uses a variable-length data structure, known as a request block, to submit requests to the driver stack. It then monitors the status of the request and manages any resources that are required by the request. The result is a clean separation between the application and the USB driver stack. See Getting Started with Driver Development for more information.
4. Restart
Once you’re done installing the driver, restart your PC. This is very important because when you install a driver, it will create a system-wide service that runs in the background and updates the ADB drivers for your computer. This will keep your computer from getting corrupted, and will ensure that the ADB driver stays installed.
Now that you have the driver, you should be able to update your firmware with the Amlogic USB Burning Tool. This is a Windows based program that will allow you to upgrade your Amlogic, Rockchip and Allwinner box using a USB stick. Just make sure that the firmware you use is correct for your device, otherwise it may cause harmful consequences. Also, be sure to read the user manual before installing the firmware.