Xiaomi 13 Pro Global ROM Download Free

In this post we have shared the full global ROM of Xiaomi 13 Pro. The ROM is also known as firmware. Firmware of phone does at that stage if phone is working slow or completely break due to its firmware. At that moment you will need to update its firmware or hard flash it by using a PC.

Xiaomi 13 Pro Overview

The Xiaomi 13 Pro is a high-end smartphone model manufactured by Xiaomi, a Chinese electronics company. It was released in China in late 2021, and it has not yet been officially released globally. However, Xiaomi is known for its strong global presence and often releases Global ROMs for its devices.

Global ROMs are versions of the phone’s operating system that have been localized for different regions of the world, including language support and compatibility with local cellular networks. It is expected that Xiaomi will release a Global ROM for the Xiaomi 13 Pro in the near future.

How to flash

Flashing a Xiaomi 13 Pro involves installing a new firmware or operating system onto the device. It is important to note that flashing a device can potentially void its warranty and should only be done if you are comfortable with the process and understand the risks involved.

Here are the general steps for flashing a Xiaomi 13 Pro:

  1. First, ensure that you have the correct firmware or ROM file for your device. You can download the firmware from the official Xiaomi website or from trusted third-party sources.
  2. Next, enable Developer Options on your Xiaomi 13 Pro by going to Settings > About phone > MIUI version and tapping on it seven times. This will enable the Developer Options menu.
  3. In Developer Options, enable USB debugging and OEM unlocking.
  4. Connect your Xiaomi 13 Pro to your computer using a USB cable and ensure that it is recognized by your computer.
  5. Download and install the Xiaomi Mi Flash Tool on your computer.
  6. Boot your Xiaomi 13 Pro into fastboot mode by turning it off, then holding down the Volume Down and Power buttons simultaneously until the fastboot screen appears.
  7. Launch the Xiaomi Mi Flash Tool on your computer and select the firmware or ROM file you downloaded earlier.
  8. Click on the “Refresh” button in the Mi Flash Tool to ensure that your Xiaomi 13 Pro is detected.
  9. Click on the “Flash” button to start the flashing process. This can take a few minutes to complete.
  10. Once the flashing process is complete, your Xiaomi 13 Pro will reboot automatically and should now have the new firmware or ROM installed.

Again, it is important to note that flashing a device can potentially cause problems or void its warranty, so proceed with caution and make sure you understand the risks involved.

You can keep an eye out for updates on Xiaomi’s official website or social media channels. Additionally, you can check with your local Xiaomi retailer or online store to see if they have any information on the availability of the Global ROM.

USB driver

To connect your Xiaomi 13 Pro to your computer via USB, you may need to install the appropriate USB driver for your device. Here are the general steps for installing the USB driver:

  1. First, download the Xiaomi USB Driver on your computer from the official Xiaomi website or from trusted third-party sources.
  2. Once the download is complete, extract the contents of the downloaded file to a folder on your computer.
  3. Connect your Xiaomi 13 Pro to your computer via USB cable.
  4. On your Xiaomi 13 Pro, swipe down from the top of the screen to access the notification panel, and tap on the “USB for Charging” notification.
  5. In the USB settings, select “File transfer” or “MTP” mode to allow your computer to access your device’s files.
  6. Open the Windows Device Manager on your computer by right-clicking on the Windows Start button and selecting “Device Manager”.
  7. In the Device Manager, locate your Xiaomi 13 Pro device under the “Portable Devices” or “Other Devices” category.
  8. Right-click on your Xiaomi 13 Pro device and select “Update Driver”.
  9. In the Update Driver window, select “Browse my computer for driver software”.
  10. Navigate to the folder where you extracted the Xiaomi USB Driver files and select the appropriate driver for your operating system.
  11. Follow the on-screen instructions to complete the driver installation.

Once the driver is installed, you should be able to connect your Xiaomi 13 Pro to your computer via USB and transfer files or perform other tasks as needed.

Data backup

You will need to take a backup of your data before flashing. Otherwise you will lose it and phone will be restore in its original settings. You can safely restore backup data to phone after flashing.

Leave a Comment